[PATCH 32/38] Annotate hardware config module parameters in drivers/video/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/video/.

Suggested-by: Alan Cox <gnomes at lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells at redhat.com>
cc: Jaya Kumar <jayalk at intworks.biz>
cc: Tomi Valkeinen <tomi.valkeinen at ti.com>
cc: linux-fbdev at vger.kernel.org
---

 drivers/video/fbdev/arcfb.c |    8 ++++----
 drivers/video/fbdev/n411.c  |    6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/video/fbdev/arcfb.c b/drivers/video/fbdev/arcfb.c
index 1928cb2b5386..7e87d0d61658 100644
--- a/drivers/video/fbdev/arcfb.c
+++ b/drivers/video/fbdev/arcfb.c
@@ -645,17 +645,17 @@ module_param(nosplash, uint, 0);
 MODULE_PARM_DESC(nosplash, "Disable doing the splash screen");
 module_param(arcfb_enable, uint, 0);
 MODULE_PARM_DESC(arcfb_enable, "Enable communication with Arc board");
-module_param(dio_addr, ulong, 0);
+module_param_hw(dio_addr, ulong, ioport, 0);
 MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480");
-module_param(cio_addr, ulong, 0);
+module_param_hw(cio_addr, ulong, ioport, 0);
 MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400");
-module_param(c2io_addr, ulong, 0);
+module_param_hw(c2io_addr, ulong, ioport, 0);
 MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408");
 module_param(splashval, ulong, 0);
 MODULE_PARM_DESC(splashval, "Splash pattern: 0xFF is black, 0x00 is green");
 module_param(tuhold, ulong, 0);
 MODULE_PARM_DESC(tuhold, "Time to hold between strobing data to Arc board");
-module_param(irq, uint, 0);
+module_param_hw(irq, uint, irq, 0);
 MODULE_PARM_DESC(irq, "IRQ for the Arc board");
 
 module_init(arcfb_init);
diff --git a/drivers/video/fbdev/n411.c b/drivers/video/fbdev/n411.c
index 053deacad7cc..a3677313396e 100644
--- a/drivers/video/fbdev/n411.c
+++ b/drivers/video/fbdev/n411.c
@@ -193,11 +193,11 @@ module_exit(n411_exit);
 
 module_param(nosplash, uint, 0);
 MODULE_PARM_DESC(nosplash, "Disable doing the splash screen");
-module_param(dio_addr, ulong, 0);
+module_param_hw(dio_addr, ulong, ioport, 0);
 MODULE_PARM_DESC(dio_addr, "IO address for data, eg: 0x480");
-module_param(cio_addr, ulong, 0);
+module_param_hw(cio_addr, ulong, ioport, 0);
 MODULE_PARM_DESC(cio_addr, "IO address for control, eg: 0x400");
-module_param(c2io_addr, ulong, 0);
+module_param_hw(c2io_addr, ulong, ioport, 0);
 MODULE_PARM_DESC(c2io_addr, "IO address for secondary control, eg: 0x408");
 module_param(splashval, ulong, 0);
 MODULE_PARM_DESC(splashval, "Splash pattern: 0x00 is black, 0x01 is white");

--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html