[PATCH v6 4/4] tree-wide: purge verified remaining legacy ghost options

[Breno Rodrigues Alves]

Clean up the remaining dead Kconfig weight from the tree that gates no
active driver code, and remove the dangling comment inside drivers/leds/Kconfig.

Assisted-by: OpenCode AI
Signed-off-by: Breno Rodrigues Alves <breno3011alves at gmail.com>
---
 drivers/clk/sunxi/Kconfig        | 7 -------
 drivers/leds/Kconfig             | 1 -
 drivers/media/platform/Kconfig   | 6 ------
 drivers/pci/pwrctrl/Kconfig      | 9 ---------
 drivers/video/fbdev/core/Kconfig | 6 ------
 security/apparmor/Kconfig        | 9 ---------
 6 files changed, 38 deletions(-)

diff --git a/drivers/clk/sunxi/Kconfig b/drivers/clk/sunxi/Kconfig
index 5e2f92bfe..3ba500b9d 100644
--- a/drivers/clk/sunxi/Kconfig
+++ b/drivers/clk/sunxi/Kconfig
@@ -32,11 +32,4 @@ config CLK_SUNXI_PRCM_SUN8I
 	  Those are usually needed for the PMIC communication,
 	  mostly.
 
-config CLK_SUNXI_PRCM_SUN9I
-	bool "Legacy A80 PRCM driver"
-	default ARCH_SUNXI
-	help
-	  Legacy clock driver for the A80 PRCM clocks. Those are
-	  usually needed for the PMIC communication, mostly.
-
 endif
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index d0d318223..800fbd560 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -873,7 +873,6 @@ config LEDS_UPBOARD
 	  This driver can also be built as a module. If so the module will be
 	  called leds-upboard.
 
-comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
 
 config LEDS_BLINKM
 	tristate "LED support for the BlinkM I2C RGB LED"
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 2c7699b66..dbef2275f 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -22,12 +22,6 @@ config SDR_PLATFORM_DRIVERS
 	help
 	  Say Y here to enable support for platform-specific SDR Drivers.
 
-config DVB_PLATFORM_DRIVERS
-	bool "DVB platform devices"
-	depends on MEDIA_DIGITAL_TV_SUPPORT
-	help
-	  Say Y here to enable support for platform-specific Digital TV drivers.
-
 config V4L_MEM2MEM_DRIVERS
 	bool "Memory-to-memory multimedia devices"
 	depends on VIDEO_DEV
diff --git a/drivers/pci/pwrctrl/Kconfig b/drivers/pci/pwrctrl/Kconfig
index 9eec767cd..853dd16b0 100644
--- a/drivers/pci/pwrctrl/Kconfig
+++ b/drivers/pci/pwrctrl/Kconfig
@@ -39,12 +39,3 @@ config PCI_PWRCTRL_TC9563
 	  MAC is connected as endpoint device. Other two downstream ports are
 	  supposed to connect to external device.
 
-# deprecated
-config HAVE_PWRCTL
-	bool
-	select HAVE_PWRCTRL
-
-# deprecated
-config PCI_PWRCTL_PWRSEQ
-	tristate
-	select PCI_PWRCTRL_PWRSEQ
diff --git a/drivers/video/fbdev/core/Kconfig b/drivers/video/fbdev/core/Kconfig
index 8d1993e0b..14860a1ae 100644
--- a/drivers/video/fbdev/core/Kconfig
+++ b/drivers/video/fbdev/core/Kconfig
@@ -155,12 +155,6 @@ config FB_IOMEM_HELPERS
 	select FB_CFB_IMAGEBLIT
 	select FB_IOMEM_FOPS
 
-config FB_IOMEM_HELPERS_DEFERRED
-	bool
-	depends on FB_CORE
-	select FB_DEFERRED_IO
-	select FB_IOMEM_HELPERS
-
 config FB_SYSMEM_HELPERS
 	bool
 	depends on FB_CORE
diff --git a/security/apparmor/Kconfig b/security/apparmor/Kconfig
index a1f3749bd..508fd7f02 100644
--- a/security/apparmor/Kconfig
+++ b/security/apparmor/Kconfig
@@ -35,15 +35,6 @@ config SECURITY_APPARMOR_DEBUG_ASSERTS
 	  points. If the assert is triggered it will trigger a WARN
 	  message.
 
-config SECURITY_APPARMOR_DEBUG_MESSAGES
-	bool "Debug messages enabled by default"
-	depends on SECURITY_APPARMOR_DEBUG
-	default n
-	help
-	  Set the default value of the apparmor.debug kernel parameter.
-	  When enabled, various debug messages will be logged to
-	  the kernel message buffer.
-
 config SECURITY_APPARMOR_INTROSPECT_POLICY
 	bool "Allow loaded policy to be introspected"
 	depends on SECURITY_APPARMOR
-- 
2.43.0