[RFC PATCH 4/4] firmware: arm_ffa: check pkvm initailised when initailise ffa driver

[Yeoreum Yun]

Hi Marc,

> On Sat, 18 Apr 2026 11:34:30 +0100,
> Yeoreum Yun <yeoreum.yun at arm.com> wrote:
> >
> > > > @@ -2035,6 +2037,16 @@ static int __init ffa_init(void)
> > > >  	u32 buf_sz;
> > > >  	size_t rxtx_bufsz = SZ_4K;
> > > >
> > > > +	/*
> > > > +	 * When pKVM is enabled, the FF-A driver must be initialized
> > > > +	 * after pKVM initialization. Otherwise, pKVM cannot negotiate
> > > > +	 * the FF-A version or obtain RX/TX buffer information,
> > > > +	 * which leads to failures in FF-A calls.
> > > > +	 */
> > > > +	if (IS_ENABLED(CONFIG_KVM) && is_protected_kvm_enabled() &&
> > > > +	    !is_kvm_arm_initialised())
> > > > +		return -EPROBE_DEFER;
> > > > +
> > >
> > > That's still fundamentally wrong: pkvm is not ready until
> > > finalize_pkvm() has finished, and that's not indicated by
> > > is_kvm_arm_initialised().
> >
> > Thanks. I miss the TSC bit set in here.
>
> That's the least of the problems. None of the infrastructure is in
> place at this stage...
>
> > IMHO, I'd like to make an new state check function --
> > is_pkvm_arm_initialised() so that ff-a driver to know whether
> > pkvm is initialised.
>
> Doesn't sound great, TBH.
>
> > or any other suggestion?
>
> Instead of adding more esoteric predicates, I'd rather you build on an
> existing infrastructure. You have a dependency on KVM, use something
> that is designed to enforce dependencies. Device links spring to mind
> as something designed for that.
>
> Can you look into enabling this for KVM? If that's possible, then it
> should be easy enough to delay the actual KVM registration after pKVM
> is finalised.

Hmm, I also considered moving kvm_init() into finalised_pkvm() and
then handling the remaining ffa_init() work after /dev/kvm is registered.

However, this approach seems awkward in practice,
because misc has neither a bus nor a dedicated class notifier that we can hook into.

Also, the FF-A initialization is not driven by a device probe, but rather
happens as part of the bus registration itself,
so it does not fit well with a device_link or probe deferral based approach.

Instead, perhaps we could go with the idea I mentioned previously:
either introduce a notifier, or create a pseudo ffa_device
once pKVM initialization has completed, and
then let the ffa driver perform the additional initialization from there.

Am I missing something?

--
Sincerely,
Yeoreum Yun