IMA Reports No TPM Device

Thangavel, Karthik karthik.thangavel at amd.com
Wed Jul 10 11:12:37 UTC 2024


Hi,

Patch in below link helped us to resolve this issue,
https://community.infineon.com/t5/OPTIGA-TPM/i-MX8MP-with-TPM-SLB9670/td-p/403949#.

Now TPM driver is probed before IMA test.

Regards,
Karthik

> -----Original Message-----
> From: Roberto Sassu <roberto.sassu at huaweicloud.com>
> Sent: Tuesday, June 18, 2024 6:12 PM
> To: Thangavel, Karthik <karthik.thangavel at amd.com>; linux-security-
> module at vger.kernel.org; linux-spi at vger.kernel.org
> Cc: Gaddipati, Naveen <naveen.gaddipati at amd.com>; Narra, Bharath Kumar
> <BharathKumar.Narra at amd.com>
> Subject: Re: IMA Reports No TPM Device
> 
> On Tue, 2024-06-18 at 10:24 +0000, Thangavel, Karthik wrote:
> > Hi,
> >
> > Can you pls let us know how to resolve this issue.
> > Looks many reported the same issue in forums.
> 
> Hi
> 
> this discussion seems to be related:
> 
> https://lore.kernel.org/all/1550753358.17768.85.camel@linux.ibm.com/t/#m5fd
> 27cc9c80e90e781ccc5e1c3e693014d0278a2
> 
> 
> Maybe there could be suggestions that apply to your case. We can also resume
> the discussion, if the fix is not yet upstreamed.
> 
> Roberto
> 
> > Regards,
> > Karthik
> >
> > > -----Original Message-----
> > > From: Thangavel, Karthik
> > > Sent: Friday, June 7, 2024 12:49 PM
> > > To: linux-security-module at vger.kernel.org; linux-spi at vger.kernel.org
> > > Cc: Gaddipati, Naveen <naveen.gaddipati at amd.com>; Narra, Bharath
> > > Kumar <BharathKumar.Narra at amd.com>
> > > Subject: IMA Reports No TPM Device
> > >
> > > Hi,
> > >
> > > We are booting linux v6.1.30 on Xilinx ZynqMP SoC which is using ARM-A53.
> > > We want to run IMA on TPM device connected over SPI interface.
> > > During booting found that IMA reports "No TPM chip found".
> > >
> > > Please find the below logs which shows IMA subsystem init called
> > > before TPM device.
> > >
> > >
> > > [    0.000000] Linux version 6.1.30-xilinx-v2023.2 (oe-user at oe-host)
> (aarch64-
> > > xilinx-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils)
> > > 2.39.0.20220819) #1 SMP Fri Sep 22 10:41:01 UTC 2023
> > > [    0.000000] Machine model: xlnx,zynqmp
> > > ...
> > > [    2.561405] ima: No TPM chip found, activating TPM-bypass!
> > > [    2.567199] ima: Allocated hash algorithm: sha256
> > > ...
> > > [    3.727105] tpm_tis_spi spi1.0: 2.0 TPM (device-id 0x1B, rev-id 22)
> > > [    3.764152] tpm tpm0: starting up the TPM manually
> > > ...
> > >
> > > In security/integrity/ima/ima_main.c
> > > late_initcall(init_ima);	/* Start IMA after the TPM is available */
> > >
> > > As per above comment line IMA should start after TPM is available.
> > > But we are observing the opposite behavior.
> > > Please let us know how to fix this issue.
> > >
> > > -Karthik



More information about the Linux-security-module-archive mailing list