[PATCH 4/5] evm: Use the real inode's metadata to calculate metadata hash

Amir Goldstein amir73il at gmail.com
Thu Feb 1 14:11:58 UTC 2024


On Thu, Feb 1, 2024 at 3:37 PM Stefan Berger <stefanb at linux.ibm.com> wrote:
>
>
>
> On 2/1/24 07:10, Amir Goldstein wrote:
> > On Wed, Jan 31, 2024 at 7:46 PM Stefan Berger <stefanb at linux.ibm.com> wrote:
> >>
> >>
> >>
> >> On 1/31/24 12:23, Amir Goldstein wrote:
> >>> On Wed, Jan 31, 2024 at 5:54 PM Amir Goldstein <amir73il at gmail.com> wrote:
> >>>>
> >>>> On Wed, Jan 31, 2024 at 4:40 PM Stefan Berger <stefanb at linux.ibm.com> wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>> On 1/31/24 08:16, Amir Goldstein wrote:
> >>>>>> On Wed, Jan 31, 2024 at 4:11 AM Stefan Berger <stefanb at linux.ibm.com> wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> On 1/30/24 16:46, Stefan Berger wrote:
> >>>>>>>> Changes to the file attribute (mode bits, uid, gid) on the lower layer
> >>>>>>>> are not take into account when d_backing_inode() is used when a file is
> >>>>>>>> accessed on the overlay layer and this file has not yet been copied up.
> >>>>>>>> This is because d_backing_inode() does not return the real inode of the
> >>>>>>>> lower layer but instead returns the backing inode which holds old file
> >>>>>>>> attributes. When the old file attributes are used for calculating the
> >>>>>>>> metadata hash then the expected hash is calculated and the file then
> >>>>>>>> mistakenly passes signature verification. Therefore, use d_real_inode()
> >>>>>>>> which returns the inode of the lower layer for as long as the file has
> >>>>>>>> not been copied up and returns the upper layer's inode otherwise.
> >>>>>>>>
> >>>>>>>> Signed-off-by: Stefan Berger <stefanb at linux.ibm.com>
> >>>>>>>> ---
> >>>>>>>>      security/integrity/evm/evm_crypto.c | 2 +-
> >>>>>>>>      1 file changed, 1 insertion(+), 1 deletion(-)
> >>>>>>>>
> >>>>>>>> diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c
> >>>>>>>> index b1ffd4cc0b44..2e48fe54e899 100644
> >>>>>>>> --- a/security/integrity/evm/evm_crypto.c
> >>>>>>>> +++ b/security/integrity/evm/evm_crypto.c
> >>>>>>>> @@ -223,7 +223,7 @@ static int evm_calc_hmac_or_hash(struct dentry *dentry,
> >>>>>>>>                                   size_t req_xattr_value_len,
> >>>>>>>>                                   uint8_t type, struct evm_digest *data)
> >>>>>>>>      {
> >>>>>>>> -     struct inode *inode = d_backing_inode(dentry);
> >>>>>>>> +     struct inode *inode = d_real_inode(dentry);
> >>>>>>>>          struct xattr_list *xattr;
> >>>>>>>>          struct shash_desc *desc;
> >>>>>>>>          size_t xattr_size = 0;
> >>>>>>>
> >>>>>>> We need this patch when NOT activating CONFIG_OVERLAY_FS_METACOPY but
> >>>>>>> when setting CONFIG_OVERLAY_FS_METACOPY=y it has to be reverted...  I am
> >>>>>>> not sure what the solution is.
> >>>>>>
> >>>>>> I think d_real_inode() does not work correctly for all its current users for
> >>>>>> a metacopy file.
> >>>>>>
> >>>>>> I think the solution is to change d_real_inode() to return the data inode
> >>>>>> and add another helper to get the metadata inode if needed.
> >>>>>> I will post some patches for it.
> >>>>>
> >>>>> I thought that we may have to go through vfs_getattr() but even better
> >>>>> if we don't because we don't have the file *file anywhere 'near'.
> >>>>>
> >>>>>>
> >>>>>> However, I must say that I do not know if evm_calc_hmac_or_hash()
> >>>>>> needs the lower data inode, the upper metadata inode or both.
> >>>>>
> >>>>> What it needs are data structures with mode bits, uid, and gid that stat
> >>>>> in userspace would show.
> >>>>>
> >>>>>
> >>>>
> >>>> With or without metacopy enabled, an overlay inode st_uid st_gid st_mode
> >>>> are always taken from the upper most inode which is what d_real_inode()
> >>>> currently returns, so I do not understand what the problem is.
> >>>>
> >>>
> >>> No, I was wrong. It is the other way around.
> >>> d_real_inode() always returns the real data inode and you need the
> >>> upper most real inode.
> >>>
> >>> You can try this:
> >>>
> >>>    -     struct inode *inode = d_backing_inode(dentry);
> >>> +     struct inode *inode = d_inode(d_real(dentry, false));
> >>>
> >>> With the changes in:
> >>>
> >>> https://github.com/amir73il/linux/commits/overlayfs-devel/
> >>>
> >>> Not thoroughly tested...
> >>
> >> The change + 3 topmost patches cherry-picked is unfortunately are
> >> crashing for me.
> >>
> >
> > I will look into it.
> > But anyway, the patch I suggested above is not enough exactly because
> > of the reason I told you earlier.
> >
> > Mimi's fix ("ima: detect changes to the backing overlay file") detects
> > a change in d_real_inode(file_dentry(file)) in order to invalidate the
> > IMA cache.
> >
> > Your change also invalidates EVM cache on a change in
> > d_real_inode(file_dentry(file)) and that makes sense.
> >
> > But on "meta copy up" for example on chmod(), an upper inode with no data
> > is created (a metacopy) and all the attributes and xattr are copied
> > from lower inode.
> > The data remains in the lower inode.
> >
> > At this point , the IMA cache and the EVM cache refer to two different inodes
>
> You mean they refer to different inodes because IMA cares about file
> content ("data remains in the lower inode:) and EVM cares about the
> metadata ("an upper inode with no data is created")? If so, I agree

Correct.

> since the following line after copy-up with meatacopy enabled shows the
> proper GID is in the backing inode not the one return from
> d_real_inode(). If we knew that a meta copy has been done we could call
> d_backing_inode() in this case for access to mode bits, uid, and gid.
>

You should be able to use
d_real_meta_inode(dentry) != d_real_inode(dentry) to figure that out.

> +       printk(KERN_INFO "real: GID: %d  backing: GID: %d\n",
> +              from_kgid(&init_user_ns, d_real_inode(dentry)->i_gid),
> +              from_kgid(&init_user_ns, d_backing_inode(dentry)->i_gid));
> +
>
>  > so you cannot share the same logic with IMA cache invalidation.
>
> I thought we we would have to share the same logic since IMA and EVM
> would have to refer to the same inode also since IMA and EVM are
> strongly connected. So the file_inode(file), which is typically used for
> finding the iint, should be the same 'high level' inode for both EVM and
> IMA I thought. A different inode could then be used for file data and
> metadata.
>
> >
> > My patches are meant to provide you with a helper e.g. d_real_meta_inode()
>
> The patch providing this isn't there yet in overlayfs-devel, right?

It's there just not spelled out with these helper names:

d_real_meta_inode(d) := d_inode(d_real(dentry, false))
d_real_data_inode(d) := d_inode(d_real(dentry, true))
d_real_inode(d) := d_real_data_inode(d)

I think this use case is pretty specific to EVM, so I don't think
I will actually define these d_real_*_inode() helpers.

>
> > that you could use to get the upper inode in the case of a metacopy, but
> > IMA would still need to use the d_real_data_inode().
>
> That would be fine since we are only changing EVM code in this case.

Yes, using those overlayfs APIs requires understanding of what they mean
and knowing how to test the affected use cases.
This is not something very common for other subsystem developers.

> >
> > Is that explanation clear? Is it clear why I said that the problem is more
> > complicated?
>
> I think I understand it.
>

I think I am also starting to understand the expectation from IMA/EVM
over overlayfs ;)

Anyway, let me see if I can fix the problem in my WIP branch.

Thanks,
Amir.



More information about the Linux-security-module-archive mailing list