[PATCH ima-evm-utils v5] Add tests for MMAP_CHECK and MMAP_CHECK_REQPROT hooks
Roberto Sassu
roberto.sassu at huaweicloud.com
Fri Feb 3 12:56:37 UTC 2023
From: Roberto Sassu <roberto.sassu at huawei.com>
Add tests to ensure that, after applying the kernel patch 'ima: Align
ima_file_mmap() parameters with mmap_file LSM hook', the MMAP_CHECK hook
checks the protections applied by the kernel and not those requested by the
application.
Also ensure that after applying 'ima: Introduce MMAP_CHECK_REQPROT hook',
the MMAP_CHECK_REQPROT hook checks the protections requested by the
application.
Test both with the test_mmap application that by default requests the
PROT_READ protection flag. Its syntax is:
test_mmap <file> <mode>
where mode can be:
- exec: adds the PROT_EXEC protection flag to mmap()
- read_implies_exec: calls the personality() system call with
READ_IMPLIES_EXEC as the first argument before mmap()
- mprotect: adds the PROT_EXEC protection flag to a memory area in addition
to PROT_READ
- exec_on_writable: calls mmap() with PROT_EXEC on a file which has a
writable mapping
Check the different combinations of hooks/modes and ensure that a
measurement entry is found in the IMA measurement list only when it is
expected. No measurement entry should be found when only the PROT_READ
protection flag is requested or the matching policy rule has the
MMAP_CHECK_REQPROT hook and the personality() system call was called with
READ_IMPLIES_EXEC.
mprotect() with PROT_EXEC on an existing memory area protected with
PROT_READ should be denied (with an appraisal rule), regardless of the MMAP
hook specified in the policy. The same applies for mmap() with PROT_EXEC on
a file with a writable mapping.
Signed-off-by: Roberto Sassu <roberto.sassu at huawei.com>
---
Changelog
v4:
- Use separate UIDs for fowner= in measure and appraise policies
- Add error messages for unexpected failed mmap() (reported by Mimi) and
mprotect()
v3:
- Check if there are IMA policy rules without fowner= and fsuuid=, and
if yes, skip the tests due to possible interference (suggested by Mimi)
- Fix style issues in tests/mmap_check.test
v2:
- Distinguish setup-related errors from test-related errors in test_mmap
- Rename key_path and key_path_der variables to g_key_path and
g_key_path_der (suggested by Stefan)
- Write data to the test file in check_mmap()
- Ensure that there are no setup-related errors from test_mmap in
tests/mmap_check.test
- Print the found entry in the IMA measurement list (suggested by Mimi)
- Check for errors when writing the test file in check_deny()
- Pass TST_KEY_PATH to the new environment
- Add description to each test (suggested by Mimi)
v1:
- Declare PATCHES and uses new expect_pass_if() and expect_fail_if()
(suggested by Stefan)
- Replace $FAIL with $HARDFAIL when the error occurs in the setup phase of
the test (to not make an expect_fail test successful for other reasons
than the focus of the test)
- Declare local variables in one line (suggested by Stefan)
- Print the test being executed at the beginning, so that the message
always appears also if an error occurs
- Print the result of the tests in a separate line and separate the output
of each test
tests/Makefile.am | 4 +-
tests/mmap_check.test | 359 ++++++++++++++++++++++++++++++++++++++++++
tests/test_mmap.c | 128 +++++++++++++++
3 files changed, 490 insertions(+), 1 deletion(-)
create mode 100755 tests/mmap_check.test
create mode 100644 tests/test_mmap.c
diff --git a/tests/Makefile.am b/tests/Makefile.am
index a0463b7b5b5d..ca9c4ca18380 100644
--- a/tests/Makefile.am
+++ b/tests/Makefile.am
@@ -2,7 +2,9 @@ check_SCRIPTS =
TESTS = $(check_SCRIPTS)
check_SCRIPTS += ima_hash.test sign_verify.test boot_aggregate.test \
- fsverity.test portable_signatures.test
+ fsverity.test portable_signatures.test mmap_check.test
+
+check_PROGRAMS := test_mmap
.PHONY: check_logs
check_logs:
diff --git a/tests/mmap_check.test b/tests/mmap_check.test
new file mode 100755
index 000000000000..d33838fd6935
--- /dev/null
+++ b/tests/mmap_check.test
@@ -0,0 +1,359 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2022-2023 Roberto Sassu <roberto.sassu at huawei.com>
+#
+# Check the behavior of MMAP_CHECK and MMAP_CHECK_REQPROT
+
+trap '_report_exit_and_cleanup _cleanup_env cleanup' SIGINT SIGTERM SIGSEGV EXIT
+
+PATCHES=(
+'ima: Align ima_file_mmap() parameters with mmap_file LSM hook'
+'ima: Introduce MMAP_CHECK_REQPROT hook'
+)
+
+# Base VERBOSE on the environment variable, if set.
+VERBOSE="${VERBOSE:-0}"
+
+# Errors defined in test_mmap
+ERR_SETUP=1
+ERR_TEST=2
+
+cd "$(dirname "$0")" || exit "$FAIL"
+export PATH=$PWD/../src:$PWD:$PATH
+export LD_LIBRARY_PATH=$LD_LIBRARY_PATH
+. ./functions.sh
+_require evmctl
+
+cleanup() {
+ if [ "$g_loop_mounted" = "1" ]; then
+ popd > /dev/null || exit "$FAIL"
+ umount "$g_mountpoint"
+ fi
+
+ if [ -n "$g_dev" ]; then
+ losetup -d "$g_dev"
+ fi
+
+ if [ -n "$g_image" ]; then
+ rm -f "$g_image"
+ fi
+
+ if [ -n "$g_mountpoint" ]; then
+ rm -Rf "$g_mountpoint"
+ fi
+
+ if [ -n "$g_key_path_der" ]; then
+ rm -f "$g_key_path_der"
+ fi
+}
+
+# Use the fsuuid= IMA policy keyword to select only files created/used by the
+# tests below. Also use fowner= to differentiate between files created/used by
+# individual tests.
+IMA_UUID="28b23254-9467-44c0-b6ba-34b12e85a26e"
+MEASURE_MMAP_CHECK_FOWNER=2000
+MEASURE_MMAP_CHECK_REQPROT_FOWNER=2001
+MEASURE_MMAP_CHECK_RULE="measure func=MMAP_CHECK fsuuid=$IMA_UUID fowner=$MEASURE_MMAP_CHECK_FOWNER"
+MEASURE_MMAP_CHECK_REQPROT_RULE="measure func=MMAP_CHECK_REQPROT fsuuid=$IMA_UUID fowner=$MEASURE_MMAP_CHECK_REQPROT_FOWNER"
+APPRAISE_MMAP_CHECK_FOWNER=2002
+APPRAISE_MMAP_CHECK_REQPROT_FOWNER=2003
+APPRAISE_MMAP_CHECK_RULE="appraise func=MMAP_CHECK fsuuid=$IMA_UUID fowner=$APPRAISE_MMAP_CHECK_FOWNER"
+APPRAISE_MMAP_CHECK_REQPROT_RULE="appraise func=MMAP_CHECK_REQPROT fsuuid=$IMA_UUID fowner=$APPRAISE_MMAP_CHECK_REQPROT_FOWNER"
+
+check_load_ima_rule() {
+ local rule_loaded result new_policy
+
+ rule_loaded=$(grep "$1" /sys/kernel/security/ima/policy)
+ if [ -z "$rule_loaded" ]; then
+ new_policy=$(mktemp -p "$g_mountpoint")
+ echo "$1" > "$new_policy"
+ echo "$new_policy" > /sys/kernel/security/ima/policy
+ result=$?
+ rm -f "$new_policy"
+
+ if [ "$result" -ne 0 ]; then
+ echo "${RED}Failed to set IMA policy${NORM}"
+ return "$HARDFAIL"
+ fi
+ fi
+
+ return "$OK"
+}
+
+check_mmap() {
+ local hook="$1"
+ local arg="$2"
+ local test_file fowner rule result test_file_entry
+
+ echo -e "\nTest: ${FUNCNAME[0]} (hook=\"$hook\", test_mmap arg: \"$arg\")"
+
+ if ! test_file=$(mktemp -p "$PWD"); then
+ echo "${RED}Cannot create $test_file${NORM}"
+ return "$HARDFAIL"
+ fi
+
+ if ! echo "test" > "$test_file"; then
+ echo "${RED}Cannot write $test_file${NORM}"
+ return "$FAIL"
+ fi
+
+ fowner="$MEASURE_MMAP_CHECK_FOWNER"
+ rule="$MEASURE_MMAP_CHECK_RULE"
+
+ if [ "$hook" = "MMAP_CHECK_REQPROT" ]; then
+ fowner="$MEASURE_MMAP_CHECK_REQPROT_FOWNER"
+ rule="$MEASURE_MMAP_CHECK_REQPROT_RULE"
+ fi
+
+ if ! chown "$fowner" "$test_file"; then
+ echo "${RED}Cannot change owner of $test_file${NORM}"
+ return "$HARDFAIL"
+ fi
+
+ check_load_ima_rule "$rule"
+ result=$?
+ if [ $result -ne "$OK" ]; then
+ return $result
+ fi
+
+ test_mmap "$test_file" "$arg"
+ result=$?
+
+ if [ $result -ne 0 ] && [ $result -ne "$ERR_TEST" ]; then
+ echo "${RED}Unexpected exit status $result from test_mmap${NORM}"
+ return "$HARDFAIL"
+ fi
+
+ if [ "$TFAIL" != "yes" ]; then
+ echo -n "Result (expect found): "
+ else
+ echo -n "Result (expect not found): "
+ fi
+
+ test_file_entry=$(awk '$5 == "'"$test_file"'"' < /sys/kernel/security/ima/ascii_runtime_measurements)
+ if [ -z "$test_file_entry" ]; then
+ echo "not found"
+ return "$FAIL"
+ fi
+
+ echo "found"
+
+ if [ "$VERBOSE" -gt 0 ]; then
+ echo "$test_file_entry"
+ fi
+
+ return "$OK"
+}
+
+check_deny() {
+ local hook="$1"
+ local arg="$2"
+ local test_file fowner rule result
+
+ echo -e "\nTest: ${FUNCNAME[0]} (hook=\"$hook\", test_mmap arg: \"$arg\")"
+
+ if ! test_file=$(mktemp -p "$PWD"); then
+ echo "${RED}Cannot create $test_file${NORM}"
+ return "$HARDFAIL"
+ fi
+
+ if ! echo "test" > "$test_file"; then
+ echo "${RED}Cannot write $test_file${NORM}"
+ return "$FAIL"
+ fi
+
+ if ! evmctl ima_sign -a sha256 --key "$g_key_path" "$test_file" &> /dev/null; then
+ echo "${RED}Cannot sign $test_file${NORM}"
+ return "$HARDFAIL"
+ fi
+
+ fowner="$APPRAISE_MMAP_CHECK_FOWNER"
+ rule="$APPRAISE_MMAP_CHECK_RULE"
+
+ if [ "$hook" = "MMAP_CHECK_REQPROT" ]; then
+ fowner="$APPRAISE_MMAP_CHECK_REQPROT_FOWNER"
+ rule="$APPRAISE_MMAP_CHECK_REQPROT_RULE"
+ fi
+
+ if ! chown "$fowner" "$test_file"; then
+ echo "${RED}Cannot change owner of $test_file${NORM}"
+ return "$HARDFAIL"
+ fi
+
+ check_load_ima_rule "$rule"
+ result=$?
+ if [ $result -ne "$OK" ]; then
+ return $result
+ fi
+
+ test_mmap "$test_file" exec
+ result=$?
+
+ if [ $result -ne 0 ] && [ $result -ne "$ERR_TEST" ]; then
+ echo "${RED}Unexpected exit status $result from test_mmap${NORM}"
+ return "$HARDFAIL"
+ fi
+
+ test_mmap "$test_file" "$arg"
+ result=$?
+
+ if [ $result -ne 0 ] && [ $result -ne "$ERR_TEST" ]; then
+ echo "${RED}Unexpected exit status $result from test_mmap${NORM}"
+ return "$HARDFAIL"
+ fi
+
+ if [ "$TFAIL" != "yes" ]; then
+ echo -n "Result (expect denied): "
+ else
+ echo -n "Result (expect allowed): "
+ fi
+
+ if [ $result -eq 0 ]; then
+ echo "allowed"
+ return "$FAIL"
+ fi
+
+ echo "denied"
+ return "$OK"
+}
+
+# Run in the new environment if TST_ENV is set.
+_run_env "$TST_KERNEL" "$PWD/$(basename "$0")" "TST_ENV=$TST_ENV TST_KERNEL=$TST_KERNEL PATH=$PATH LD_LIBRARY_PATH=$LD_LIBRARY_PATH VERBOSE=$VERBOSE TST_KEY_PATH=$TST_KEY_PATH"
+
+# Exit from the creator of the new environment.
+_exit_env "$TST_KERNEL"
+
+# Mount filesystems in the new environment.
+_init_env
+
+if [ "$(whoami)" != "root" ]; then
+ echo "${CYAN}This script must be executed as root${NORM}"
+ exit "$SKIP"
+fi
+
+if [ ! -f /sys/kernel/security/ima/policy ]; then
+ echo "${CYAN}IMA policy file not found${NORM}"
+ exit "$SKIP"
+fi
+
+if ! cat /sys/kernel/security/ima/policy &> /dev/null; then
+ echo "${CYAN}IMA policy file is not readable${NORM}"
+ exit "$SKIP"
+fi
+
+if ! awk '$0 ~ /^(measure|appraise)/ && $0 !~ /fsuuid=/ && $0 !~ /fowner=/ { exit 1 }' < /sys/kernel/security/ima/policy; then
+ echo "${CYAN}IMA policy rules without fsuuid= and fowner=, cannot continue due to possible interference with the tests${NORM}"
+ exit "$SKIP"
+fi
+
+if [ -n "$TST_KEY_PATH" ]; then
+ if [ "${TST_KEY_PATH:0:1}" != "/" ]; then
+ echo "${RED}Absolute path required for the signing key${NORM}"
+ exit "$FAIL"
+ fi
+
+ if [ ! -f "$TST_KEY_PATH" ]; then
+ echo "${RED}Kernel signing key not found in $TST_KEY_PATH${NORM}"
+ exit "$FAIL"
+ fi
+
+ g_key_path="$TST_KEY_PATH"
+elif [ -f "$PWD/../signing_key.pem" ]; then
+ g_key_path="$PWD/../signing_key.pem"
+elif [ -f "/lib/modules/$(uname -r)/source/certs/signing_key.pem" ]; then
+ g_key_path="/lib/modules/$(uname -r)/source/certs/signing_key.pem"
+elif [ -f "/lib/modules/$(uname -r)/build/certs/signing_key.pem" ]; then
+ g_key_path="/lib/modules/$(uname -r)/build/certs/signing_key.pem"
+else
+ echo "${CYAN}Kernel signing key not found${NORM}"
+ exit "$SKIP"
+fi
+
+g_key_path_der=$(mktemp)
+
+openssl x509 -in "$g_key_path" -out "$g_key_path_der" -outform der
+if ! keyctl padd asymmetric pubkey %keyring:.ima < "$g_key_path_der" &> /dev/null; then
+ echo "${RED}Public key cannot be added to the IMA keyring${NORM}"
+ exit "$FAIL"
+fi
+
+g_mountpoint=$(mktemp -d)
+g_image=$(mktemp)
+
+if [ -z "$g_mountpoint" ]; then
+ echo "${RED}Mountpoint directory not created${NORM}"
+ exit "$FAIL"
+fi
+
+if ! dd if=/dev/zero of="$g_image" bs=1M count=20 &> /dev/null; then
+ echo "${RED}Cannot create test image${NORM}"
+ exit "$FAIL"
+fi
+
+g_dev=$(losetup -f "$g_image" --show)
+if [ -z "$g_dev" ]; then
+ echo "${RED}Cannot create loop device${NORM}"
+ exit "$FAIL"
+fi
+
+if ! mkfs.ext4 -U "$IMA_UUID" -b 4096 "$g_dev" &> /dev/null; then
+ echo "${RED}Cannot format $g_dev${NORM}"
+ exit "$FAIL"
+fi
+
+if ! mount -o i_version "$g_dev" "$g_mountpoint"; then
+ echo "${RED}Cannot mount loop device${NORM}"
+ exit "$FAIL"
+fi
+
+g_loop_mounted=1
+pushd "$g_mountpoint" > /dev/null || exit "$FAIL"
+
+# Ensure that IMA does not add a new measurement entry if an application calls
+# mmap() with PROT_READ, and a policy rule contains the MMAP_CHECK hook.
+# In this case, both the protections requested by the application and the final
+# protections applied by the kernel contain only PROT_READ, so there is no
+# match with the IMA rule, which expects PROT_EXEC to be set.
+expect_fail check_mmap "MMAP_CHECK" ""
+
+# Ensure that IMA adds a new measurement entry if an application calls mmap()
+# with PROT_READ | PROT_EXEC, and a policy rule contains the MMAP_CHECK hook.
+expect_pass check_mmap "MMAP_CHECK" "exec"
+
+# Same as in the first test, but in this case the application calls the
+# personality() system call with READ_IMPLIES_EXEC, which causes the kernel to
+# add PROT_EXEC in the final protections passed to the MMAP_CHECK hook.
+#
+# Ensure that the bug introduced by 98de59bfe4b2 ("take calculation of final
+# protections in security_mmap_file() into a helper") is fixed, by passing the
+# final protections again to the MMAP_CHECK hook. Due to the bug, the hook
+# received the protections requested by the application. Since those protections
+# don't have PROT_EXEC, IMA was not creating a measurement entry.
+expect_pass_if '0' check_mmap "MMAP_CHECK" "read_implies_exec"
+
+# Repeat the previous three tests, but with the new MMAP_CHECK_REQPROT hook,
+# which behaves like the buggy MMAP_CHECK hook. In the third test, expect that
+# no new measurement entry is created, since the MMAP_CHECK_REQPROT hook sees
+# the protections requested by the application (PROT_READ).
+expect_fail_if '1' check_mmap "MMAP_CHECK_REQPROT" ""
+expect_pass_if '1' check_mmap "MMAP_CHECK_REQPROT" "exec"
+expect_fail_if '1' check_mmap "MMAP_CHECK_REQPROT" "read_implies_exec"
+
+# Ensure that IMA refuses an mprotect() with PROT_EXEC on a memory area
+# obtained with an mmap() with PROT_READ. This is due to the inability of IMA
+# to measure/appraise the file for which mmap() was called (locking issue).
+expect_pass check_deny "MMAP_CHECK" "mprotect"
+
+# Ensure that MMAP_CHECK_REQPROT has the same behavior of MMAP_CHECK for the
+# previous test.
+expect_pass_if '1' check_deny "MMAP_CHECK_REQPROT" "mprotect"
+
+# Ensure that there cannot be an mmap() with PROT_EXEC on a file with writable
+# mappings, due to the inability of IMA to make a reliable measurement of that
+# file.
+expect_pass check_deny "MMAP_CHECK" "exec_on_writable"
+
+# Ensure that MMAP_CHECK_REQPROT has the same behavior of MMAP_CHECK for the
+# previous test.
+expect_pass_if '1' check_deny "MMAP_CHECK_REQPROT" "exec_on_writable"
diff --git a/tests/test_mmap.c b/tests/test_mmap.c
new file mode 100644
index 000000000000..63e7597f29a8
--- /dev/null
+++ b/tests/test_mmap.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Huawei Technologies Duesseldorf GmbH
+ *
+ * Tool to test IMA MMAP_CHECK and MMAP_CHECK_REQPROT hooks.
+ */
+#include <stdio.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <sys/personality.h>
+
+/*
+ * Convention: return 1 for errors that should not occur, as they are
+ * setup-related, return 2 for errors that might occur due to testing
+ * conditions.
+ */
+#define ERR_SETUP 1
+#define ERR_TEST 2
+
+int main(int argc, char *argv[])
+{
+ struct stat st;
+ void *ptr, *ptr_write = NULL;
+ int ret, fd, fd_write, prot = PROT_READ;
+
+ if (!argv[1]) {
+ printf("Missing file parameter\n");
+ return ERR_SETUP;
+ }
+
+ if (argv[2] && !strcmp(argv[2], "read_implies_exec")) {
+ ret = personality(READ_IMPLIES_EXEC);
+ if (ret == -1) {
+ printf("Failed to set personality, err: %d (%s)\n",
+ -errno, strerror(errno));
+ return ERR_SETUP;
+ }
+ }
+
+ if (stat(argv[1], &st) == -1) {
+ printf("Failed to access %s, err: %d (%s)\n", argv[1], -errno,
+ strerror(errno));
+ return ERR_SETUP;
+ }
+
+ if (argv[2] && !strcmp(argv[2], "exec_on_writable")) {
+ fd_write = open(argv[1], O_RDWR);
+ if (fd_write == -1) {
+ printf("Failed to open %s in r/w, err: %d (%s)\n",
+ argv[1], -errno, strerror(errno));
+ return ERR_SETUP;
+ }
+
+ ptr_write = mmap(0, st.st_size, PROT_WRITE, MAP_SHARED,
+ fd_write, 0);
+ close(fd_write);
+
+ if (ptr_write == MAP_FAILED) {
+ printf("Failed mmap() with PROT_WRITE on %s, err: %d (%s)\n",
+ argv[1], -errno, strerror(errno));
+ return ERR_SETUP;
+ }
+ }
+
+ fd = open(argv[1], O_RDONLY);
+ if (fd == -1) {
+ printf("Failed to open %s in ro, err: %d (%s)\n", argv[1],
+ -errno, strerror(errno));
+
+ if (ptr_write && munmap(ptr_write, st.st_size) == -1)
+ printf("Failed munmap() of writable mapping on %s, err: %d (%s)\n",
+ argv[1], -errno, strerror(errno));
+
+ return ERR_SETUP;
+ }
+
+ if (argv[2] && !strncmp(argv[2], "exec", 4))
+ prot |= PROT_EXEC;
+
+ ptr = mmap(0, st.st_size, prot, MAP_PRIVATE, fd, 0);
+
+ close(fd);
+
+ if (ptr_write && munmap(ptr_write, st.st_size) == -1) {
+ printf("Failed munmap() of writable mapping on %s, err: %d (%s)\n",
+ argv[1], -errno, strerror(errno));
+ return ERR_SETUP;
+ }
+
+ if (ptr == MAP_FAILED) {
+ ret = ERR_SETUP;
+ if (argv[2] && !strcmp(argv[2], "exec_on_writable") &&
+ errno == EACCES)
+ ret = ERR_TEST;
+ else
+ printf("Failed mmap() with PROT_READ%s on %s, err: %d (%s)\n",
+ (prot & PROT_EXEC) ? " | PROT_EXEC" : "",
+ argv[1], -errno, strerror(errno));
+
+ return ret;
+ }
+
+ ret = 0;
+
+ if (argv[2] && !strcmp(argv[2], "mprotect")) {
+ ret = mprotect(ptr, st.st_size, PROT_EXEC);
+ if (ret == -1) {
+ ret = ERR_SETUP;
+ if (errno == EPERM)
+ ret = ERR_TEST;
+ else
+ printf("Unexpected mprotect() error on %s, err: %d (%s)\n",
+ argv[1], -errno, strerror(errno));
+ }
+ }
+
+ if (munmap(ptr, st.st_size) == -1) {
+ printf("Failed munmap() of mapping on %s, err: %d (%s)\n",
+ argv[1], -errno, strerror(errno));
+ return ERR_SETUP;
+ }
+
+ return ret;
+}
--
2.25.1
More information about the Linux-security-module-archive
mailing list