[PATCH] ima: fix infinite loop within "ima_match_policy" function.
liqiong
liqiong at nfschina.com
Mon Aug 23 08:06:40 UTC 2021
Hi Simon :
Using a temporary ima_rules variable is not working for "ima_policy_next".
void *ima_policy_next(struct seq_file *m, void *v, loff_t *pos)
{
struct ima_rule_entry *entry = v;
-
+ struct list_head *ima_rules_tmp = rcu_dereference(ima_rules);
rcu_read_lock();
entry = list_entry_rcu(entry->list.next, struct ima_rule_entry, list);
rcu_read_unlock();
(*pos)++;
- return (&entry->list == ima_rules) ? NULL : entry;
+ return (&entry->list == ima_rules_tmp) ? NULL : entry;
}
It seems no way to fix "ima_rules" change within this function, it will alway
return a entry if "ima_rules" being changed.
Regrads,
liqiong
在 2021年08月23日 11:04, 李力琼 写道:
> Hi Mimi :
>
> The situation is a little different,'list_splice_init_rcu'
> don't change the list head. If "ima_rules" being changed,
> readers may can't reload the new value in time for cpu cache
> or compiler optimization. Defining "ima_rules" as a volatile
> variable can fix, but It is inefficient.
>
> Maybe using a temporary ima_rules variable for every
> "list_for_each_entry_rcu(entry, ima_rules, list)" loop is
> a better solution to fix the "endless loop" bug.
>
> Regards,
>
> liqiong
>
> 在 2021年08月20日 23:48, Mimi Zohar 写道:
>> On Fri, 2021-08-20 at 13:23 +0000, THOBY Simon wrote:
>>> Hi Liqiong,
>>>
>>> On 8/20/21 12:15 PM, 李力琼 wrote:
>>>> Hi, Simon:
>>>>
>>>> This solution is better then rwsem, a temp "ima_rules" variable should
>>>> can fix. I also have a another idea, with a little trick, default list
>>>> can traverse to the new list, so we don't need care about the read side.
>>>>
>>>> here is the patch:
>>>>
>>>> @@ -918,8 +918,21 @@ void ima_update_policy(void)
>>>> list_splice_tail_init_rcu(&ima_temp_rules, policy, synchronize_rcu);
>>>>
>>>> if (ima_rules != policy) {
>>>> + struct list_head *prev_rules = ima_rules;
>>>> + struct list_head *first = ima_rules->next;
>>>> ima_policy_flag = 0;
>>>> +
>>>> + /*
>>>> + * Make the previous list can traverse to new list,
>>>> + * that is tricky, or there is a deadly loop whithin
>>>> + * "list_for_each_entry_rcu(entry, ima_rules, list)"
>>>> + *
>>>> + * After update "ima_rules", restore the previous list.
>>>> + */
>>> I think this could be rephrased to be a tad clearer, I am not quite sure
>>> how I must interpret the first sentence of the comment.
>>>
>>>
>>>> + prev_rules->next = policy->next;
>>>> ima_rules = policy;
>>>> + syncchronize_rcu();
>>> I'm a bit puzzled as you seem to imply in the mail this patch was tested,
>>> but there is no 'syncchronize_rcu' (with two 'c') symbol in the kernel.
>>> Was that a copy/paste error? Or maybe you forgot the 'not' in "This
>>> patch has been tested"? These errors happen, and I am myself quite an
>>> expert in doing them :)
>>>
>>>> + prev_rules->next = first;
>>>>
>>>>
>>>> The side effect is the "ima_default_rules" will be changed a little while.
>>>> But it make sense, the process should be checked again by the new policy.
>>>>
>>>> This patch has been tested, if will do, I can resubmit this patch.>
>>>> How about this ?
>>> least
>>>
>>> Correct me if I'm wrong, here is how I think I understand you patch.
>>> We start with a situation like that (step 0):
>>> ima_rules --> List entry 0 (head node) = ima_default_rules <-> List entry 1 <-> List entry 2 <-> ... <-> List entry 0
>>>
>>> Then we decide to update the policy for the first time, so
>>> 'ima_rules [&ima_default_rules] != policy [&ima_policy_rules]'.
>>> We enter the condition.
>>> First we copy the current value of ima_rules (&ima_default_rules)
>>> to a temporary variable 'prev_rules'. We also create a pointer dubbed
>>> 'first' to the entry 1 in the default list (step 1):
>>> prev_rules -------------
>>> \/
>>> ima_rules --> List entry 0 (head node) = ima_default_rules <-> List entry 1 <-> List entry 2 <-> ... <-> List entry 0
>>> /\
>>> first --------------------------------------------------------------
>>>
>>>
>>> Then we update prev_rules->next to point to policy->next (step 2):
>>> List entry 1 <-> List entry 2 <-> ... -> List entry 0
>>> /\
>>> first
>>> (notice that list entry 0 no longer points backwards to 'list entry 1',
>>> but I don't think there is any reverse iteration in IMA, so it should be
>>> safe)
>>>
>>> prev_rules -------------
>>> \/
>>> ima_rules --> List entry 0 (head node) = ima_default_rules
>>> |
>>> |
>>> -------------------------------------------
>>> \/
>>> policy --> policy entry 0' (head node) = ima_policy_rules <-> policy entry 1' <-> policy entry 2' <-> .... <-> policy entry 0'
>>>
>>>
>>> We then update ima_rules to point to ima_policy_rules (step 3):
>>> List entry 1 <-> List entry 2 <-> ... -> List entry 0
>>> /\
>>> first
>>>
>>> prev_rules -------------
>>> \/
>>> ima_rules List entry 0 (head node) = ima_default_rules
>>> | |
>>> | |
>>> | ------------------------------------------
>>> --------------- |
>>> \/ \/
>>> policy --> policy entry 0' (head node) = ima_policy_rules <-> policy entry 1' <-> policy entry 2' <-> .... <-> policy entry 0'
>>> synchronize_rcu /\
>>> first --------------------------------------------------------------
>>>
>>> Then we run synchronize_rcu() to wait for any RCU reader to exit their loops (step 4).
>>>
>>> Finally we update prev_rules->next to point back to the ima policy and fix the loop (step 5):
>>>
>>> List entry 1 <-> List entry 2 <-> ... -> List entry 0
>>> /\
>>> first
>>>
>>> prev_rules ---> List entry 0 (head node) = ima_default_rules <-> List entry 1 <-> List entry 2 <-> ... <-> List entry 0
>>> /\
>>> first (now useless)
>>> ima_rules
>>> |
>>> |
>>> |
>>> ---------------
>>> \/
>>> policy --> policy entry 0' (head node) = ima_policy_rules <-> policy entry 1' <-> policy entry 2' <-> .... <-> policy entry 0'
>>>
>>> The goal is that readers should still be able to loop
>>> (forward, as we saw that backward looping is temporarily broken)
>>> while in steps 0-4.
>>>
>>> I'm not completely sure what would happen to a client that started iterating
>>> over ima_rules right after step 2.
>>>
>>> Wouldn't they be able to start looping through the new policy
>>> as 'List entry 0 (head node) = ima_default_rules' points to ima_policy_rules?
>>> And if they, wouldn't they loop until the write to 'ima_rule' at step 3 (admittedly
>>> very shortly thereafter) completed?
>>> And would the compiler be allowed to optimize the read to 'ima_rules' in the
>>> list_for_each_entry() loop, thereby never reloading the new value for
>>> 'ima_rules', and thus looping forever, just what we are trying to avoid?
>>>
>>> Overall, I'm tempted to say this is perhaps a bit too complex (at least,
>>> my head tells me it is, but that may very well be because I'm terrible
>>> at concurrency issues).
>>>
>>> Honestly, in this case I think awaiting input from more experienced
>>> kernel devs than I is the best path forward :-)
>> I'm far from an expert on RCU locking, but __list_splice_init_rcu()
>> provides an example of how to make sure there aren't any readers
>> traversing the list, before two lists are spliced together. In our
>> case, after there aren't any readers, instead of splicing two lists
>> together, it should be safe to point to the new list.
>>
>> thanks,
>>
>> Mimi
>>
More information about the Linux-security-module-archive
mailing list