Enabling interrupts in QEMU TPM TIS

[Jason Gunthorpe]

On Fri, Jun 26, 2020 at 08:25:57AM -0400, Stefan Berger wrote:

> > I don't think the tpm driver was ever designed for edge, so most
> > likely the structure and order of the hard irq is not correct.
> 
> Right. For edge support I think we would need to avoid causing another
> interrupt (like locality change interrupt) before the interrupt handler
> hasn't finished dealing with an existing interrupt. Considering that Windows
> works on IRQ 13 (egde) and Linux driver cannot, I guess this is a good
> reason not to move QEMU TIS to IRQ 13 and try to support interrupts via ACPI
> table declaration.

Generaly clearing the IRQ needs to be done before testing for pending
IRQs - ie as the first thing

Move the write to status up higher:

	rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &interrupt);
	rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), interrupt);
	
        [handle 'interrupt']

Then if new events set a status bit they will generate an edge and
re-enter here.

I don't know why there is an extra read at the end of the handler
either, seems sketchy.

Jason