[PATCH 7/7] Documentation for Pmalloc

[J Freyensee]

Minus the comment-fixes Mike Rapoport mentioned, looks good:

Reviewed-by: Jay Freyensee <why2jjj.linux at gmail.com>


On 2/28/18 12:06 PM, Igor Stoppa wrote:
> Detailed documentation about the protectable memory allocator.
>
> Signed-off-by: Igor Stoppa <igor.stoppa at huawei.com>
> ---
>   Documentation/core-api/index.rst   |   1 +
>   Documentation/core-api/pmalloc.rst | 111 +++++++++++++++++++++++++++++++++++++
>   2 files changed, 112 insertions(+)
>   create mode 100644 Documentation/core-api/pmalloc.rst
>
> diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
> index c670a8031786..8f5de42d6571 100644
> --- a/Documentation/core-api/index.rst
> +++ b/Documentation/core-api/index.rst
> @@ -25,6 +25,7 @@ Core utilities
>      genalloc
>      errseq
>      printk-formats
> +   pmalloc
>   
>   Interfaces for kernel debugging
>   ===============================
> diff --git a/Documentation/core-api/pmalloc.rst b/Documentation/core-api/pmalloc.rst
> new file mode 100644
> index 000000000000..8fb9c9d3171b
> --- /dev/null
> +++ b/Documentation/core-api/pmalloc.rst
> @@ -0,0 +1,111 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Protectable memory allocator
> +============================
> +
> +Purpose
> +-------
> +
> +The pmalloc library is meant to provide R/O status to data that, for some
> +reason, could neither be declared as constant, nor could it take advantage
> +of the qualifier __ro_after_init, but is write-once and read-only in spirit.
> +It protects data from both accidental and malicious overwrites.
> +
> +Example: A policy that is loaded from userspace.
> +
> +
> +Concept
> +-------
> +
> +pmalloc builds on top of genalloc, using the same concept of memory pools.
> +
> +The value added by pmalloc is that now the memory contained in a pool can
> +become R/O, for the rest of the life of the pool.
> +
> +Different kernel drivers and threads can use different pools, for finer
> +control of what becomes R/O and when. And for improved lockless concurrency.
> +
> +
> +Caveats
> +-------
> +
> +- Memory freed while a pool is not yet protected will be reused.
> +
> +- Once a pool is protected, it's not possible to allocate any more memory
> +  from it.
> +
> +- Memory "freed" from a protected pool indicates that such memory is not
> +  in use anymore by the requester; however, it will not become available
> +  for further use, until the pool is destroyed.
> +
> +- pmalloc does not provide locking support with respect to allocating vs
> +  protecting an individual pool, for performance reasons.
> +  It is recommended not to share the same pool between unrelated functions.
> +  Should sharing be a necessity, the user of the shared pool is expected
> +  to implement locking for that pool.
> +
> +- pmalloc uses genalloc to optimize the use of the space it allocates
> +  through vmalloc. Some more TLB entries will be used, however less than
> +  in the case of using vmalloc directly. The exact number depends on the
> +  size of each allocation request and possible slack.
> +
> +- Considering that not much data is supposed to be dynamically allocated
> +  and then marked as read-only, it shouldn't be an issue that the address
> +  range for pmalloc is limited, on 32-bit systems.
> +
> +- Regarding SMP systems, the allocations are expected to happen mostly
> +  during an initial transient, after which there should be no more need to
> +  perform cross-processor synchronizations of page tables.
> +
> +- To facilitate the conversion of existing code to pmalloc pools, several
> +  helper functions are provided, mirroring their kmalloc counterparts.
> +
> +
> +Use
> +---
> +
> +The typical sequence, when using pmalloc, is:
> +
> +1. create a pool
> +
> +.. kernel-doc:: include/linux/pmalloc.h
> +   :functions: pmalloc_create_pool
> +
> +2. [optional] pre-allocate some memory in the pool
> +
> +.. kernel-doc:: include/linux/pmalloc.h
> +   :functions: pmalloc_prealloc
> +
> +3. issue one or more allocation requests to the pool with locking as needed
> +
> +.. kernel-doc:: include/linux/pmalloc.h
> +   :functions: pmalloc
> +
> +.. kernel-doc:: include/linux/pmalloc.h
> +   :functions: pzalloc
> +
> +4. initialize the memory obtained with desired values
> +
> +5. [optional] iterate over points 3 & 4 as needed
> +
> +6. write-protect the pool
> +
> +.. kernel-doc:: include/linux/pmalloc.h
> +   :functions: pmalloc_protect_pool
> +
> +7. use in read-only mode the handles obtained through the allocations
> +
> +8. [optional] release all the memory allocated
> +
> +.. kernel-doc:: include/linux/pmalloc.h
> +   :functions: pfree
> +
> +9. [optional, but depends on point 8] destroy the pool
> +
> +.. kernel-doc:: include/linux/pmalloc.h
> +   :functions: pmalloc_destroy_pool
> +
> +API
> +---
> +
> +.. kernel-doc:: include/linux/pmalloc.h

--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html