[RFC PATCH 5/5] selinux: Add SCTP support

Stephen Smalley sds at tycho.nsa.gov
Fri Oct 20 19:00:28 UTC 2017


On Tue, 2017-10-17 at 14:59 +0100, Richard Haines wrote:
> The SELinux SCTP implementation is explained in:
> Documentation/security/SELinux-sctp.txt
> 
> Signed-off-by: Richard Haines <richard_c_haines at btinternet.com>
> ---
>  Documentation/security/SELinux-sctp.txt | 108 +++++++++++++
>  security/selinux/hooks.c                | 268
> ++++++++++++++++++++++++++++++--
>  security/selinux/include/classmap.h     |   3 +-
>  security/selinux/include/netlabel.h     |   9 +-
>  security/selinux/include/objsec.h       |   5 +
>  security/selinux/netlabel.c             |  52 ++++++-
>  6 files changed, 427 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/security/SELinux-sctp.txt
> 
> diff --git a/Documentation/security/SELinux-sctp.txt
> b/Documentation/security/SELinux-sctp.txt
> new file mode 100644
> index 0000000..32e0255
> --- /dev/null
> +++ b/Documentation/security/SELinux-sctp.txt
> @@ -0,0 +1,108 @@
> +                               SCTP SELinux Support
> +                              ======================
> +
> +Security Hooks
> +===============
> +
> +The Documentation/security/LSM-sctp.txt document describes how the
> following
> +sctp security hooks are utilised:
> +    security_sctp_assoc_request()
> +    security_sctp_bind_connect()
> +    security_sctp_sk_clone()
> +
> +    security_inet_conn_established()
> +
> +
> +Policy Statements
> +==================
> +The following class and permissions to support SCTP are available
> within the
> +kernel:
> +    class sctp_socket inherits socket { node_bind }
> +
> +whenever the following policy capability is enabled:
> +    policycap extended_socket_class;
> +
> +The SELinux SCTP support adds the additional permissions that are
> explained
> +in the sections below:
> +    association bindx connectx
> +
> +If userspace tools have been updated, SCTP will support the portcon
> +statement as shown in the following example:
> +    portcon sctp 1024-1036 system_u:object_r:sctp_ports_t:s0
> +
> +
> +SCTP Bind, Connect and ASCONF Chunk Parameter Permission Checks
> +================================================================
> +The hook security_sctp_bind_connect() is called by SCTP to check
> permissions
> +required for ipv4/ipv6 addresses based on the @optname as follows:
> +
> +  ------------------------------------------------------------------
> +  |                      BINDX Permission Check                    |
> +  |       @optname             |         @address contains         |
> +  |----------------------------|-----------------------------------|
> +  | SCTP_SOCKOPT_BINDX_ADD     | One or more ipv4 / ipv6 addresses |
> +  ------------------------------------------------------------------
> +
> +  ------------------------------------------------------------------
> +  |                  BIND Permission Checks                        |
> +  |       @optname             |         @address contains         |
> +  |----------------------------|-----------------------------------|
> +  | SCTP_PRIMARY_ADDR          | Single ipv4 or ipv6 address       |
> +  | SCTP_SET_PEER_PRIMARY_ADDR | Single ipv4 or ipv6 address       |
> +  ------------------------------------------------------------------
> +
> +  ------------------------------------------------------------------
> +  |                 CONNECTX Permission Check                      |
> +  |       @optname             |         @address contains         |
> +  |----------------------------|-----------------------------------|
> +  | SCTP_SOCKOPT_CONNECTX      | One or more ipv4 / ipv6 addresses |
> +  ------------------------------------------------------------------
> +
> +  ------------------------------------------------------------------
> +  |                 CONNECT Permission Checks                      |
> +  |       @optname             |         @address contains         |
> +  |----------------------------|-----------------------------------|
> +  | SCTP_SENDMSG_CONNECT       | Single ipv4 or ipv6 address       |
> +  | SCTP_PARAM_ADD_IP          | One or more ipv4 / ipv6 addresses |
> +  | SCTP_PARAM_SET_PRIMARY     | Single ipv4 or ipv6 address       |
> +  ------------------------------------------------------------------
> +
> +SCTP Peer Labeling
> +===================
> +An SCTP socket will only have one peer label assigned to it. This
> will be
> +assigned during the establishment of the first association. Once the
> peer
> +label has been assigned, any new associations will have the
> "association"
> +permission validated by checking the socket peer sid against the
> received
> +packets peer sid to determine whether the association should be
> allowed or
> +denied.
> +
> +NOTES:
> +   1) If peer labeling is not enabled, then the peer context will
> always be
> +      SECINITSID_UNLABELED (unlabeled_t in Reference Policy).
> +
> +   2) As SCTP supports multiple endpoints with multi-homing on a
> single socket
> +      it is recommended that peer labels are consistent.
> +
> +   3) getpeercon(3) may be used by userspace to retrieve the sockets
> peer
> +       context.
> +
> +   4) If using NetLabel be aware that if a label is assigned to a
> specific
> +      interface, and that interface 'goes down', then the NetLabel
> service
> +      will remove the entry. Therefore ensure that the network
> startup scripts
> +      call netlabelctl(8) to set the required label (see netlabel-
> config(8)
> +      helper script for details).
> +
> +   5) The NetLabel SCTP peer labeling rules apply as discussed in
> the following
> +      set of posts tagged "netlabel" at: http://www.paul-moore.com/b
> log/t.
> +
> +   6) CIPSO is only supported for IPv4 addressing: socket(AF_INET,
> ...)
> +      CALIPSO is only supported for IPv6 addressing:
> socket(AF_INET6, ...)
> +
> +      Note the following when testing CIPSO/CALIPSO:
> +         a) CIPSO will send an ICMP packet if an SCTP packet cannot
> be
> +            delivered because of an invalid label.
> +         b) CALIPSO does not send an ICMP packet, just silently
> discards it.
> +
> +   7) IPSEC is not supported as rfc3554 - sctp/ipsec support has not
> been
> +      implemented in userspace (racoon(8) or ipsec_pluto(8)),
> although the
> +      kernel supports SCTP/IPSEC.
> diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
> index 33fd061..c3e9600 100644
> --- a/security/selinux/hooks.c
> +++ b/security/selinux/hooks.c
> @@ -67,6 +67,8 @@
>  #include <linux/tcp.h>
>  #include <linux/udp.h>
>  #include <linux/dccp.h>
> +#include <linux/sctp.h>
> +#include <net/sctp/structs.h>
>  #include <linux/quota.h>
>  #include <linux/un.h>		/* for Unix socket types */
>  #include <net/af_unix.h>	/* for Unix socket types */
> @@ -4119,6 +4121,23 @@ static int selinux_parse_skb_ipv4(struct
> sk_buff *skb,
>  		break;
>  	}
>  
> +#if IS_ENABLED(CONFIG_IP_SCTP)
> +	case IPPROTO_SCTP: {
> +		struct sctphdr _sctph, *sh;
> +
> +		if (ntohs(ih->frag_off) & IP_OFFSET)
> +			break;
> +
> +		offset += ihlen;
> +		sh = skb_header_pointer(skb, offset, sizeof(_sctph),
> &_sctph);
> +		if (sh == NULL)
> +			break;
> +
> +		ad->u.net->sport = sh->source;
> +		ad->u.net->dport = sh->dest;
> +		break;
> +	}
> +#endif
>  	default:
>  		break;
>  	}
> @@ -4192,6 +4211,19 @@ static int selinux_parse_skb_ipv6(struct
> sk_buff *skb,
>  		break;
>  	}
>  
> +#if IS_ENABLED(CONFIG_IP_SCTP)
> +	case IPPROTO_SCTP: {
> +		struct sctphdr _sctph, *sh;
> +
> +		sh = skb_header_pointer(skb, offset, sizeof(_sctph),
> &_sctph);
> +		if (sh == NULL)
> +			break;
> +
> +		ad->u.net->sport = sh->source;
> +		ad->u.net->dport = sh->dest;
> +		break;
> +	}
> +#endif
>  	/* includes fragments */
>  	default:
>  		break;
> @@ -4381,6 +4413,10 @@ static int selinux_socket_post_create(struct
> socket *sock, int family,
>  		sksec = sock->sk->sk_security;
>  		sksec->sclass = sclass;
>  		sksec->sid = sid;
> +		/* Allows detection of the first association on this
> socket */
> +		if (sksec->sclass == SECCLASS_SCTP_SOCKET)
> +			sksec->sctp_assoc_state = SCTP_ASSOC_UNSET;
> +

What prevents this from interleaving with selinux_sctp_assoc_request()
accesses to sctp_assoc_state?

>  		err = selinux_netlbl_socket_post_create(sock->sk,
> family);
>  	}
>  
> @@ -4401,11 +4437,7 @@ static int selinux_socket_bind(struct socket
> *sock, struct sockaddr *address, in
>  	if (err)
>  		goto out;
>  
> -	/*
> -	 * If PF_INET or PF_INET6, check name_bind permission for
> the port.
> -	 * Multiple address binding for SCTP is not supported yet:
> we just
> -	 * check the first address now.
> -	 */
> +	/* If PF_INET or PF_INET6, check name_bind permission for
> the port. */
>  	family = sk->sk_family;
>  	if (family == PF_INET || family == PF_INET6) {
>  		char *addrp;
> @@ -4417,7 +4449,13 @@ static int selinux_socket_bind(struct socket
> *sock, struct sockaddr *address, in
>  		unsigned short snum;
>  		u32 sid, node_perm;
>  
> -		if (family == PF_INET) {
> +		/*
> +		 * sctp_bindx(3) calls via
> selinux_sctp_bind_connect()
> +		 * that validates multiple binding addresses.
> Because of this
> +		 * need to check address->sa_family as it is
> possible to have
> +		 * sk->sk_family = PF_INET6 with addr->sa_family =
> AF_INET.
> +		 */
> +		if (family == PF_INET || address->sa_family ==
> AF_INET) {
>  			if (addrlen < sizeof(struct sockaddr_in)) {
>  				err = -EINVAL;
>  				goto out;
> @@ -4471,6 +4509,10 @@ static int selinux_socket_bind(struct socket
> *sock, struct sockaddr *address, in
>  			node_perm = DCCP_SOCKET__NODE_BIND;
>  			break;
>  
> +		case SECCLASS_SCTP_SOCKET:
> +			node_perm = SCTP_SOCKET__NODE_BIND;
> +			break;
> +
>  		default:
>  			node_perm = RAWIP_SOCKET__NODE_BIND;
>  			break;
> @@ -4485,7 +4527,7 @@ static int selinux_socket_bind(struct socket
> *sock, struct sockaddr *address, in
>  		ad.u.net->sport = htons(snum);
>  		ad.u.net->family = family;
>  
> -		if (family == PF_INET)
> +		if (family == PF_INET || address->sa_family ==
> AF_INET)
>  			ad.u.net->v4info.saddr = addr4-
> >sin_addr.s_addr;
>  		else
>  			ad.u.net->v6info.saddr = addr6->sin6_addr;
> @@ -4510,10 +4552,12 @@ static int selinux_socket_connect(struct
> socket *sock, struct sockaddr *address,
>  		return err;
>  
>  	/*
> -	 * If a TCP or DCCP socket, check name_connect permission
> for the port.
> +	 * If a TCP, DCCP or SCTP socket, check name_connect
> permission
> +	 * for the port.
>  	 */
>  	if (sksec->sclass == SECCLASS_TCP_SOCKET ||
> -	    sksec->sclass == SECCLASS_DCCP_SOCKET) {
> +	    sksec->sclass == SECCLASS_DCCP_SOCKET ||
> +	    sksec->sclass == SECCLASS_SCTP_SOCKET) {
>  		struct common_audit_data ad;
>  		struct lsm_network_audit net = {0,};
>  		struct sockaddr_in *addr4 = NULL;
> @@ -4521,7 +4565,14 @@ static int selinux_socket_connect(struct
> socket *sock, struct sockaddr *address,
>  		unsigned short snum;
>  		u32 sid, perm;
>  
> -		if (sk->sk_family == PF_INET) {
> +		/* sctp_connectx(3) calls via
> +		 *selinux_sctp_bind_connect() that validates
> multiple
> +		 * connect addresses. Because of this need to check
> +		 * address->sa_family as it is possible to have
> +		 * sk->sk_family = PF_INET6 with addr->sa_family =
> AF_INET.
> +		 */
> +		if (sk->sk_family == PF_INET ||
> +					address->sa_family ==
> AF_INET) {
>  			addr4 = (struct sockaddr_in *)address;
>  			if (addrlen < sizeof(struct sockaddr_in))
>  				return -EINVAL;
> @@ -4534,11 +4585,21 @@ static int selinux_socket_connect(struct
> socket *sock, struct sockaddr *address,
>  		}
>  
>  		err = sel_netport_sid(sk->sk_protocol, snum, &sid);
> +
>  		if (err)
>  			goto out;
>  
> -		perm = (sksec->sclass == SECCLASS_TCP_SOCKET) ?
> -		       TCP_SOCKET__NAME_CONNECT :
> DCCP_SOCKET__NAME_CONNECT;
> +		switch (sksec->sclass) {
> +		case SECCLASS_TCP_SOCKET:
> +			perm = TCP_SOCKET__NAME_CONNECT;
> +			break;
> +		case SECCLASS_DCCP_SOCKET:
> +			perm = DCCP_SOCKET__NAME_CONNECT;
> +			break;
> +		case SECCLASS_SCTP_SOCKET:
> +			perm = SCTP_SOCKET__NAME_CONNECT;
> +			break;
> +		}
>  
>  		ad.type = LSM_AUDIT_DATA_NET;
>  		ad.u.net = &net;
> @@ -4815,7 +4876,8 @@ static int
> selinux_socket_getpeersec_stream(struct socket *sock, char __user *op
>  	u32 peer_sid = SECSID_NULL;
>  
>  	if (sksec->sclass == SECCLASS_UNIX_STREAM_SOCKET ||
> -	    sksec->sclass == SECCLASS_TCP_SOCKET)
> +	    sksec->sclass == SECCLASS_TCP_SOCKET ||
> +	    sksec->sclass == SECCLASS_SCTP_SOCKET)
>  		peer_sid = sksec->peer_sid;
>  	if (peer_sid == SECSID_NULL)
>  		return -ENOPROTOOPT;
> @@ -4928,6 +4990,183 @@ static void selinux_sock_graft(struct sock
> *sk, struct socket *parent)
>  	sksec->sclass = isec->sclass;
>  }
>  
> +/* Called whenever SCTP receives an INIT or INIT_ACK chunk */
> +static int selinux_sctp_assoc_request(struct sctp_endpoint *ep,
> +				      struct sk_buff *skb,
> +				      int sctp_cid)
> +{
> +	struct sk_security_struct *sksec = ep->base.sk->sk_security;
> +	struct common_audit_data ad;
> +	struct lsm_network_audit net = {0,};
> +	u8 peerlbl_active;
> +	u32 peer_sid = SECINITSID_UNLABELED;
> +	u32 conn_sid;
> +	int err;
> +
> +	if (!selinux_policycap_extsockclass)
> +		return 0;
> +
> +	peerlbl_active = selinux_peerlbl_enabled();
> +
> +	if (peerlbl_active) {
> +		/* This will return peer_sid = SECSID_NULL if there
> are
> +		 * no peer labels, see
> security_net_peersid_resolve().
> +		 */
> +		err = selinux_skb_peerlbl_sid(skb, ep->base.sk-
> >sk_family,
> +					      &peer_sid);
> +
> +		if (err)
> +			return err;
> +
> +		if (peer_sid == SECSID_NULL)
> +			peer_sid = SECINITSID_UNLABELED;
> +	}
> +
> +	if (sksec->sctp_assoc_state == SCTP_ASSOC_UNSET) {
> +		sksec->sctp_assoc_state = SCTP_ASSOC_SET;
> +
> +		/* Here as first association on socket. As the peer
> SID
> +		 * was allowed by peer recv (and the netif/node
> checks),
> +		 * then it is approved by policy and used as the
> primary
> +		 * peer SID for getpeercon(3).
> +		 */
> +		sksec->peer_sid = peer_sid;
> +	} else if  (sksec->peer_sid != peer_sid) {
> +		/* Other association peer SIDs are checked to
> enforce
> +		 * consistency among the peer SIDs.
> +		 */
> +		ad.type = LSM_AUDIT_DATA_NET;
> +		ad.u.net = &net;
> +		ad.u.net->sk = ep->base.sk;
> +		err = avc_has_perm(sksec->peer_sid, peer_sid, sksec-
> >sclass,
> +				   SCTP_SOCKET__ASSOCIATION, &ad);
> +		if (err)
> +			return err;
> +	}
> +
> +	if (sctp_cid == SCTP_CID_INIT) {
> +		/* Have INIT when incoming connect(2),
> sctp_connectx(3)
> +		 * or sctp_sendmsg(3) (with no association already
> present),
> +		 * so compute the MLS component for the connection
> and store
> +		 * the information in ep. This will be used by SCTP
> TCP type
> +		 * sockets and peeled off connections as they cause
> a new
> +		 * socket to be generated. selinux_sctp_sk_clone()
> will then
> +		 * plug this into the new socket.
> +		 */
> +		err = selinux_conn_sid(sksec->sid, peer_sid,
> &conn_sid);
> +		if (err)
> +			return err;
> +
> +		ep->secid = conn_sid;
> +		ep->peer_secid = peer_sid;
> +
> +		/* Set any NetLabel labels including CIPSO/CALIPSO
> options. */
> +		return selinux_netlbl_sctp_assoc_request(ep, skb);
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * Check if sctp IPv4/IPv6 addresses are valid for binding or
> connecting
> + * based on their @optname.
> + */
> +static int selinux_sctp_bind_connect(struct sock *sk, int optname,
> +				     struct sockaddr *address,
> +				     int addrlen)
> +{
> +	int len, err = 0, walk_size = 0;
> +	void *addr_buf;
> +	struct sockaddr *addr;
> +	struct socket *sock;
> +
> +	if (!selinux_policycap_extsockclass)
> +		return 0;
> +
> +	switch (optname) {
> +	case SCTP_SOCKOPT_BINDX_ADD:
> +		err = sock_has_perm(sk, SCTP_SOCKET__BINDX);
> +		break;
> +	case SCTP_SOCKOPT_CONNECTX:
> +		err = sock_has_perm(sk, SCTP_SOCKET__CONNECTX);
> +		break;
> +	/* These need SOCKET__BIND or SOCKET__CONNECT permissions
> that will
> +	 * be checked later.
> +	 */
> +	case SCTP_PRIMARY_ADDR:
> +	case SCTP_SET_PEER_PRIMARY_ADDR:
> +	case SCTP_PARAM_SET_PRIMARY:
> +	case SCTP_PARAM_ADD_IP:
> +	case SCTP_SENDMSG_CONNECT:
> +		break;
> +	default:
> +		err = -EINVAL;
> +	}
> +	if (err)
> +		return err;
> +
> +	/* Process one or more addresses that may be IPv4 or IPv6 */
> +	sock = sk->sk_socket;
> +	addr_buf = address;
> +
> +	while (walk_size < addrlen) {
> +		addr = addr_buf;
> +		switch (addr->sa_family) {
> +		case AF_INET:
> +			len = sizeof(struct sockaddr_in);
> +			break;
> +		case AF_INET6:
> +			len = sizeof(struct sockaddr_in6);
> +			break;
> +		default:
> +			return -EAFNOSUPPORT;
> +		}
> +
> +		err = -EINVAL;
> +		switch (optname) {
> +		/* Bind checks */
> +		case SCTP_PRIMARY_ADDR:
> +		case SCTP_SET_PEER_PRIMARY_ADDR:
> +		case SCTP_SOCKOPT_BINDX_ADD:
> +			err = selinux_socket_bind(sock, addr, len);
> +			break;
> +		/* Connect checks */
> +		case SCTP_SOCKOPT_CONNECTX:
> +		case SCTP_PARAM_SET_PRIMARY:
> +		case SCTP_PARAM_ADD_IP:
> +		case SCTP_SENDMSG_CONNECT:
> +			err = selinux_socket_connect(sock, addr,
> len);
> +			break;
> +		}
> +
> +		if (err)
> +			return err;
> +
> +		addr_buf += len;
> +		walk_size += len;
> +	}
> +	return 0;
> +}
> +
> +/* Called whenever a new socket is created by accept(2) or
> sctp_peeloff(3). */
> +static void selinux_sctp_sk_clone(struct sctp_endpoint *ep, struct
> sock *sk,
> +				  struct sock *newsk)
> +{
> +	struct sk_security_struct *sksec = sk->sk_security;
> +	struct sk_security_struct *newsksec = newsk->sk_security;
> +
> +	/* If policy does not support SECCLASS_SCTP_SOCKET then call
> +	 * the non-sctp clone version.
> +	 */
> +	if (!selinux_policycap_extsockclass)
> +		return selinux_sk_clone_security(sk, newsk);
> +
> +	newsksec->sid = ep->secid;
> +	newsksec->peer_sid = ep->peer_secid;
> +	newsksec->sclass = sksec->sclass;
> +	newsksec->nlbl_state = sksec->nlbl_state;
> +}
> +
>  static int selinux_inet_conn_request(struct sock *sk, struct sk_buff
> *skb,
>  				     struct request_sock *req)
>  {
> @@ -6416,6 +6655,9 @@ static struct security_hook_list
> selinux_hooks[] __lsm_ro_after_init = {
>  	LSM_HOOK_INIT(sk_clone_security, selinux_sk_clone_security),
>  	LSM_HOOK_INIT(sk_getsecid, selinux_sk_getsecid),
>  	LSM_HOOK_INIT(sock_graft, selinux_sock_graft),
> +	LSM_HOOK_INIT(sctp_assoc_request,
> selinux_sctp_assoc_request),
> +	LSM_HOOK_INIT(sctp_sk_clone, selinux_sctp_sk_clone),
> +	LSM_HOOK_INIT(sctp_bind_connect, selinux_sctp_bind_connect),
>  	LSM_HOOK_INIT(inet_conn_request, selinux_inet_conn_request),
>  	LSM_HOOK_INIT(inet_csk_clone, selinux_inet_csk_clone),
>  	LSM_HOOK_INIT(inet_conn_established,
> selinux_inet_conn_established),
> diff --git a/security/selinux/include/classmap.h
> b/security/selinux/include/classmap.h
> index b9fe343..b4b10da 100644
> --- a/security/selinux/include/classmap.h
> +++ b/security/selinux/include/classmap.h
> @@ -173,7 +173,8 @@ struct security_class_mapping secclass_map[] = {
>  	  { COMMON_CAP2_PERMS, NULL } },
>  	{ "sctp_socket",
>  	  { COMMON_SOCK_PERMS,
> -	    "node_bind", NULL } },
> +	    "node_bind", "name_connect", "association", "bindx",
> +	    "connectx", NULL } },
>  	{ "icmp_socket",
>  	  { COMMON_SOCK_PERMS,
>  	    "node_bind", NULL } },
> diff --git a/security/selinux/include/netlabel.h
> b/security/selinux/include/netlabel.h
> index 75686d5..835a0d6 100644
> --- a/security/selinux/include/netlabel.h
> +++ b/security/selinux/include/netlabel.h
> @@ -33,6 +33,7 @@
>  #include <linux/skbuff.h>
>  #include <net/sock.h>
>  #include <net/request_sock.h>
> +#include <net/sctp/structs.h>
>  
>  #include "avc.h"
>  #include "objsec.h"
> @@ -53,7 +54,8 @@ int selinux_netlbl_skbuff_getsid(struct sk_buff
> *skb,
>  int selinux_netlbl_skbuff_setsid(struct sk_buff *skb,
>  				 u16 family,
>  				 u32 sid);
> -
> +int selinux_netlbl_sctp_assoc_request(struct sctp_endpoint *ep,
> +				     struct sk_buff *skb);
>  int selinux_netlbl_inet_conn_request(struct request_sock *req, u16
> family);
>  void selinux_netlbl_inet_csk_clone(struct sock *sk, u16 family);
>  int selinux_netlbl_socket_post_create(struct sock *sk, u16 family);
> @@ -114,6 +116,11 @@ static inline int
> selinux_netlbl_conn_setsid(struct sock *sk,
>  	return 0;
>  }
>  
> +static inline int selinux_netlbl_sctp_assoc_request(struct
> sctp_endpoint *ep,
> +						    struct sk_buff
> *skb)
> +{
> +	return 0;
> +}
>  static inline int selinux_netlbl_inet_conn_request(struct
> request_sock *req,
>  						   u16 family)
>  {
> diff --git a/security/selinux/include/objsec.h
> b/security/selinux/include/objsec.h
> index 6ebc61e..660f270 100644
> --- a/security/selinux/include/objsec.h
> +++ b/security/selinux/include/objsec.h
> @@ -130,6 +130,11 @@ struct sk_security_struct {
>  	u32 sid;			/* SID of this object */
>  	u32 peer_sid;			/* SID of peer */
>  	u16 sclass;			/* sock security class */
> +
> +	enum {				/* SCTP association
> state */
> +		SCTP_ASSOC_UNSET = 0,
> +		SCTP_ASSOC_SET,
> +	} sctp_assoc_state;
>  };
>  
>  struct tun_security_struct {
> diff --git a/security/selinux/netlabel.c
> b/security/selinux/netlabel.c
> index aaba667..7d5aa15 100644
> --- a/security/selinux/netlabel.c
> +++ b/security/selinux/netlabel.c
> @@ -250,6 +250,7 @@ int selinux_netlbl_skbuff_setsid(struct sk_buff
> *skb,
>  	sk = skb_to_full_sk(skb);
>  	if (sk != NULL) {
>  		struct sk_security_struct *sksec = sk->sk_security;
> +
>  		if (sksec->nlbl_state != NLBL_REQSKB)
>  			return 0;
>  		secattr = selinux_netlbl_sock_getattr(sk, sid);
> @@ -271,6 +272,41 @@ int selinux_netlbl_skbuff_setsid(struct sk_buff
> *skb,
>  }
>  
>  /**
> + * selinux_netlbl_sctp_assoc_request - Label an incoming sctp
> association.
> + * @ep: incoming association endpoint.
> + * @skb: the packet.
> + *
> + * Description:
> + * A new incoming connection is represented by @ep, ......
> + * Returns zero on success, negative values on failure.
> + *
> + */
> +int selinux_netlbl_sctp_assoc_request(struct sctp_endpoint *ep,
> +				     struct sk_buff *skb)
> +{
> +	int rc;
> +	struct netlbl_lsm_secattr secattr;
> +	struct sk_security_struct *sksec = ep->base.sk->sk_security;
> +
> +	if (ep->base.sk->sk_family != PF_INET &&
> +				ep->base.sk->sk_family != PF_INET6)
> +		return 0;
> +
> +	netlbl_secattr_init(&secattr);
> +	rc = security_netlbl_sid_to_secattr(ep->secid, &secattr);
> +	if (rc != 0)
> +		goto assoc_request_return;
> +
> +	rc = netlbl_sctp_setattr(ep->base.sk, skb, &secattr);
> +	if (rc == 0)
> +		sksec->nlbl_state = NLBL_LABELED;
> +
> +assoc_request_return:
> +	netlbl_secattr_destroy(&secattr);
> +	return rc;
> +}
> +
> +/**
>   * selinux_netlbl_inet_conn_request - Label an incoming stream
> connection
>   * @req: incoming connection request socket
>   *
> @@ -481,7 +517,7 @@ int selinux_netlbl_socket_setsockopt(struct
> socket *sock,
>   */
>  int selinux_netlbl_socket_connect(struct sock *sk, struct sockaddr
> *addr)
>  {
> -	int rc;
> +	int rc, already_owned_by_user = 0;
>  	struct sk_security_struct *sksec = sk->sk_security;
>  	struct netlbl_lsm_secattr *secattr;
>  
> @@ -489,7 +525,16 @@ int selinux_netlbl_socket_connect(struct sock
> *sk, struct sockaddr *addr)
>  	    sksec->nlbl_state != NLBL_CONNLABELED)
>  		return 0;
>  
> -	lock_sock(sk);
> +	/* Note: When called via connect(2) this happens before the
> socket
> +	 * protocol layer connect operation and @sk is not locked,
> HOWEVER,
> +	 * when called by the SCTP protocol layer via
> sctp_connectx(3),
> +	 * sctp_sendmsg(3) or sendmsg(2), @sk is locked. Therefore
> check if
> +	 * @sk owned already.
> +	 */
> +	if (sock_owned_by_user(sk) && sksec->sclass ==
> SECCLASS_SCTP_SOCKET)
> +		already_owned_by_user = 1;
> +	else
> +		lock_sock(sk);

Conditional locking is generally considered harmful.  I'd split the
cases for the different callers, and use a common helper for both.

>  
>  	/* connected sockets are allowed to disconnect when the
> address family
>  	 * is set to AF_UNSPEC, if that is what is happening we want
> to reset
> @@ -510,6 +555,7 @@ int selinux_netlbl_socket_connect(struct sock
> *sk, struct sockaddr *addr)
>  		sksec->nlbl_state = NLBL_CONNLABELED;
>  
>  socket_connect_return:
> -	release_sock(sk);
> +	if (!already_owned_by_user)
> +		release_sock(sk);
>  	return rc;
>  }
--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html



More information about the Linux-security-module-archive mailing list