[apparmor_mmap_file] WARNING: bad unlock balance detected!
John Johansen
john.johansen at canonical.com
Wed Nov 8 15:54:53 UTC 2017
On 11/06/2017 05:38 PM, Fengguang Wu wrote:
> Hi,
>
> Here is a warning in 4.14-rc8 -- it's not necessarily a new bug.
>
sigh, yep its older than 4.14 but I have haven't finished bisecting it yet
thanks
> Please press Enter to activate this console.
> [ 45.117766] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
> [ 45.122174] 8021q: adding VLAN 0 to HW filter on device eth0
> [ 45.247159] [ 45.247451] =====================================
> [ 45.248021] WARNING: bad unlock balance detected!
> [ 45.248608] 4.14.0-rc8 #158 Not tainted
> [ 45.249087] -------------------------------------
> [ 45.249672] fw3/1183 is trying to release lock (rcu_preempt_state) at:
> [ 45.250443] [<c10e4348>] rcu_read_unlock_special+0x5f8/0x620
> [ 45.251136] but there are no more locks to release!
> [ 45.251752] [ 45.251752] other info that might help us debug this:
> [ 45.252561] 1 lock held by fw3/1183:
> [ 45.253019] #0: (rcu_read_lock){....}, at: [<c16e24c0>] aa_file_perm+0x0/0x460
> [ 45.253925] [ 45.253925] stack backtrace:
> [ 45.254526] CPU: 0 PID: 1183 Comm: fw3 Not tainted 4.14.0-rc8 #158
> [ 45.255275] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
> [ 45.256266] Call Trace:
> [ 45.256628] dump_stack+0x16/0x1c
> [ 45.257082] print_unlock_imbalance_bug+0xb9/0xd0
> [ 45.257676] ? rcu_read_unlock_special+0x5f8/0x620
> [ 45.258259] ? rcu_read_unlock_special+0x5f8/0x620
> [ 45.258871] lock_release+0x1cc/0x490
> [ 45.259347] ? rcu_read_unlock_special+0x5f8/0x620
> [ 45.259969] ? _raw_spin_unlock_irqrestore+0x86/0xd0
> [ 45.260581] rt_mutex_unlock+0x1e/0xb0
> [ 45.261054] rcu_read_unlock_special+0x5f8/0x620
> [ 45.261643] __rcu_read_unlock+0xa7/0xb0
> [ 45.262152] aa_file_perm+0x5a/0x460
> [ 45.262633] ? pvclock_clocksource_read+0xd5/0x230
> [ 45.263203] ? pvclock_clocksource_read+0xd5/0x230
> [ 45.263797] common_file_perm+0x81/0x240
> [ 45.264308] ? kvm_sched_clock_read+0x9/0x20
> [ 45.264843] common_mmap+0x93/0xd0
> [ 45.265283] ? apparmor_file_mprotect+0x30/0x30
> [ 45.265867] apparmor_mmap_file+0x12/0x20
> [ 45.266388] security_mmap_file+0xaf/0x170
> [ 45.266903] vm_mmap_pgoff+0x35/0x100
> [ 45.267381] ? __fget+0x1c3/0x1d0
> [ 45.267831] SyS_mmap_pgoff+0x16d/0x370
> [ 45.268318] do_int80_syscall_32+0x95/0x290
> [ 45.268840] entry_INT80_32+0x2f/0x2f
> [ 45.269313] EIP: 0xb7f7c2d4
> [ 45.269713] EFLAGS: 00000202 CPU: 0
> [ 45.270169] EAX: ffffffda EBX: b7f63000 ECX: 000002ad EDX: 00000003
> [ 45.270901] ESI: 00000012 EDI: 00000003 EBP: 00000004 ESP: bff29f24
> [ 45.271637] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 007b
> [ 45.351763] 8021q: adding VLAN 0 to HW filter on device eth0
> LKP: HOSTNAME vm-lkp-nhm-dp1-openwrt-ia32-6, MAC , kernel 4.14.0-rc8 158, serial console /dev/ttyS0
> [ 47.390581] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
>
> Thanks,
> Fengguang
--
To unsubscribe from this list: send the line "unsubscribe linux-security-module" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the Linux-security-module-archive
mailing list